SCBA Assembly – Two SCB Swivel Anchors attached to Galvanized Aircraft Cable 7 x 19 Strand Core Seismic Cable Restraints shall consist of galvanized steel aircraft cables sized to resist seismic loads with a minimum safety factor of two and arranged to provide all directional restraint. Cables must be pre-stretched to achieve a certified minimum…
PCCB – Push-on Clevis Cross Brace Seismic Cable Restraints shall consist of galvanized steel aircraft cables sized to resist seismic loads with a minimum safety factor of two and arranged to provide all directional restraint. Cables must be pre-stretched to achieve a certified minimum modulus of elasticity. Cable end connections shall be steel assemblies that…
CCB – Clevis Cross Brace Pipe clevis cross bolt braces are required in all restraint locations. They shall be special purpose preformed channels deep enough to be held in place by bolts passing over the cross bolt. Clevis cross braces shall have an OPA Preapproval from OSHPD in the State of California. Clevis cross brace…
SWS – 12” Long Split Pipe Seal More information coming soon… Size Pipe Size (in) 75 0.75 100 1.00 125 1.25 150 1.50 200 2.00 250 2.50 300 3.00 350 3.50 400 4.00 500 5.00 600 6.00 800 8.00 1000 10.00 1200 12.00 1400 14.00 1600 16.00 1800 18.00 Submittal & Files BULLETINS, DATA SHEETS…
SPS – 4” Long Spool Pipe Seal More information coming soon… Size Pipe Size (in) 50 0.50 75 0.75 100 1.00 125 1.25 150 1.50 200 2.00 250 2.50 300 3.00 400 4.00 500 5.00 600 6.00 800 8.00 1000 10.00 1200 12.00 Submittal & Files BULLETINS, DATA SHEETS & INFORMATION RELATED PRODUCTS
VSGH – Vertical Sliding Pipe Guides with Base Plate All-directional acoustical pipe anchors consist of two sizes of steel tubing separated by a minimum 1/2” (13mm) thickness of 60 Duro or softer neoprene. Vertical restraint shall be provided by similar material arranged to prevent up or down vertical travel. Allowable loads on the isolation material…
VSG – Vertical Sliding Pipe Guides with three Settings All-directional acoustical pipe anchors consist of two sizes of steel tubing separated by a minimum 1/2” (13mm) thickness of 60 Duro or softer neoprene. Vertical restraint shall be provided by similar material arranged to prevent up or down vertical travel. Allowable loads on the isolation material…
ADAH – 0.1” DEF. All-Directional Pipe Anchor with Base Plate for Bolting All-directional acoustical pipe anchors consist of two sizes of steel tubing separated by a minimum 1/2” (13mm) thickness of 60 Duro or softer neoprene. Vertical restraint shall be provided by similar material arranged to prevent up or down vertical travel. Allowable loads on…
ADA – 0.1” DEF. All-Directional Pipe Anchor All-directional acoustical pipe anchors consist of two sizes of steel tubing separated by a minimum 1/2” (13mm) thickness of 60 Duro or softer neoprene. Vertical restraint shall be provided by similar material arranged to prevent up or down vertical travel. Allowable loads on the isolation material shall not…
HES – 4” DEF. Pipe Expansion Hangers HES Hangers are installed at riser suspension points to control load shifts as the riser expands or contracts. If a 120 foot(37m) steel riser goes through a temperature increase of 150°F(66°C), the piping will expand 1.4″(36mm). If the piping had an anchor point in the basement, the piping…