SRC – Seismic Rod Clamp for Angles
Steel angles, sized to prevent buckling, shall be clamped to pipe or equipment rods utilizing a minimum of three ductile iron clamps at each restraint location when required. Welding of support rods is not acceptable. Rod clamp assemblies shall have an OPA Preapproval from OSHPD in the State of California. Rod clamp assemblies shall be type SRC or UCC as manufactured by Mason Industries, Inc.
|Size||Angle Size (in)
||Rod Dia. Range (in)|
|1||1x1x1/4||3/8 – 5/8|
|1 1/2||1 1/2 x 1 1/2 x 1/4||3/8 – 1|
|2||2 x 2 x 1/4||3/8 – 1 1/4|