IMF – 1” DEF. SINGLE MOUNT
Virtually eliminate structurally transmitted noise and vibration by installing equipment on Mason Industries’ Spring Isolators. Properly selected and installed spring isolators offer the greatest assurance that destructive vibration and noise will be eliminated or greatly reduced.
Spring isolators should be installed where maximum vibration and noise control is needed. They are most frequently required on upper building levels and on equipment located near inhabited areas with rotational speeds below 1200 RPM.
[su_table]
| SIZE | RATED CAPACITY (lbs) |
RATED DEFLATION (in) |
MOUNT CONSTANT (lbs/in) |
| X-23 | 23 Ibs | 1.30 in | 18 |
| X-33 | 33 Ibs | 1.10 in | 30 |
| X-54 | 54 Ibs | 1.20 in | 45 |
| X-76 | 76 Ibs | 1.02 in | 73 |
| X-113 | 113 Ibs | 1.00 in | 113 |
| X-130 | 130 Ibs | 1.00 in | 130 |
| X-175 | 175 Ibs | 1.00 in | 175 |
| X-210 | 210 Ibs | 1.00 in | 210 |
| A-12 | 12 Ibs | 1.00 in | 12 |
| A-18 | 15 Ibs | 1.00 in | 18 |
| A-25 | 20 Ibs | 1.00 in | 25 |
| A-45 | 45 Ibs | 1.60 in | 28 |
| A-75 | 75 Ibs | 1.50 in | 50 |
| A-125 | 125 Ibs | 1.33 in | 94 |
| A-200 | 200 Ibs | 1.15 in | 174 |
| A-310 | 310 Ibs | 1.00 in | 310 |
| A-400 | 400 Ibs | 1.00 in | 400 |
| A-510 | 510 Ibs | 1.00 in | 510 |
| A-625 | 625 Ibs | 1.00 in | 625 |
| B-65 | 65 Ibs | 2.10 in | 31 |
| B-85 | 85 Ibs | 2.10 in | 40 |
| B-115 | 115 Ibs | 2.00 in | 57 |
| B-150 | 150 Ibs | 2.00 in | 75 |
| B-280 | 280 Ibs | 1.60 in | 174 |
| B-450 | 450 Ibs | 1.31 in | 344 |
| B-750 | 750 Ibs | 1.12 in | 670 |
| B-1000 | 1000 Ibs | 1.00 in | 1000 |
| C-1000 | 1000 Ibs | 1.00 in | 1000 |
| C-1350 | 1350 Ibs | 1.00 in | 1350 |
| C-1750 | 1750 Ibs | 1.00 in | 1750 |
| C-2100 | 2100 Ibs | 1.00 in | 2100 |
| C-2385 | 2385 Ibs | 1.00 in | 2385 |
| C-2650 | 2650 Ibs | 1.00 in | 2650 |
| C-2935 | 2935 Ibs | 1.00 in | 2935 |
[/su_table]
