IMF – 2” DEF. SINGLE MOUNT
Virtually eliminate structurally transmitted noise and vibration by installing equipment on Mason Industries’ Spring Isolators. Properly selected and installed spring isolators offer the greatest assurance that destructive vibration and noise will be eliminated or greatly reduced.
Spring isolators should be installed where maximum vibration and noise control is needed. They are most frequently required on upper building levels and on equipment located near inhabited areas with rotational speeds below 1200 RPM.
| SIZE | RATED CAPACITY (lbs) |
RATED DEFLATION (in) |
MOUNT CONSTANT (lbs/in) |
| B-20 | 20 Ibs | 2.40 in | 8 |
| B-26 | 26 Ibs | 2.18 in | 12 |
| B-35 | 35 Ibs | 2.20 in | 16 |
| B-50 | 50 Ibs | 2.20 in | 24 |
| B-65 | 65 Ibs | 2.10 in | 31 |
| B-85 | 85 Ibs | 2.10 in | 40 |
| B-115 | 115 Ibs | 2.00 in | 57 |
| B-150 | 150 Ibs | 2.00 in | 75 |
| B2-210 | 210 Ibs | 2.12 in | 99 |
| B2-290 | 290 Ibs | 2.00 in | 144 |
| B2-450* | 450 Ibs | 2.00 in | 224 |
| B2-680* | 680 Ibs | 2.00 in | 340 |
| C2-125 | 125 Ibs | 2.50 in | 50 |
| C2-170 | 170 Ibs | 2.40 in | 70 |
| C2-210 | 210 Ibs | 2.30 in | 90 |
| C2-260 | 260 Ibs | 2.20 in | 120 |
| C2-330 | 330 Ibs | 2.00 in | 165 |
| C2-460 | 460 Ibs | 2.00 in | 230 |
| C2-610 | 610 Ibs | 2.00 in | 305 |
| C2-880* | 880 Ibs | 2.00 in | 440 |
| C2-1210* | 1210 Ibs | 2.00 in | 605 |
| C2-1540* | 1540 Ibs | 2.00 in | 770 |
| C2-1870* | 1870 Ibs | 2.00 in | 935 |
