WFB

Neoprene Flatback Waffle The Type “W” Neoprene Waffle Pad has greater carrying capacity per square inch, increased holding power and a built in contamination seal. Identical rubber grids are molded back to back for maximum rubber contact area and resistance to rib collapse or hinging. The interconnections form suction pockets for gripping smooth steel as well as rough surfaces and…

W

Neoprene Waffle Pads The Type “W” Neoprene Waffle Pad has greater carrying capacity per square inch, increased holding power and a built in contamination seal. Identical rubber grids are molded back to back for maximum rubber contact area and resistance to rib collapse or hinging. The interconnections form suction pockets for gripping smooth steel as well as rough surfaces and…

WMSW

SW Pad with Steel Plate w/o & w/ Friction Pad Size (in) MBSW Hole Size(in) Rated Load 50 lbs/in2 (lbs) Ship Wt. (lbs) 4 x 4 3/4 800 2.0 6 x 4* 3/4 1200 3.0 6 x 6* 3/4 1800 4.0 6 x 8 3/4 2400 4.5 8 x 8* 3/4 3200 5.5 10 x 10*…

MBSW

SW Pad with Steel Plate w/o & w/ Friction Pad Size (in) MBSW Hole Size(in) Rated Load 50 lbs/in2 (lbs) Ship Wt. (lbs) 4 x 4 3/4 800 2.0 6 x 4* 3/4 1200 3.0 6 x 6* 3/4 1800 4.0 6 x 8 3/4 2400 4.5 8 x 8* 3/4 3200 5.5 10 x 10*…

SUPER WSW

Layered SW Pads with Steel Shims Super WSW Super WSW-H Super WSW-M Super WSW-MH Super WSW-SW Submittal & Files BULLETINS, DATA SHEETS & INFORMATION RELATED PRODUCTS

MSW

3/8” Thick Natural Rubber Mini Super W Waffle Pad 2X2 Super W Pad sheet 18” x 18” x 3/4 ” (450 x 450 x 20mm) consists of 81 – 2” (50mm) modules. The 2” (50mm) squares are separated by a thin web that is easily cut to provide evenly dimensioned pads such as 2” x 2” (50 x 50mm), 2” x 4” (50…

SW

3/4” Thick Neoprene Super W Waffle Pad 2X2 Super W Pad sheet 18” x 18” x 3/4 ” (450 x 450 x 20mm) consists of 81 – 2” (50mm) modules. The 2” (50mm) squares are separated by a thin web that is easily cut to provide evenly dimensioned pads such as 2” x 2” (50 x 50mm), 2” x 4” (50 x 100mm),…

ML & MLS

Leveling and Shock Mounts This classic style of machinery leveling mount is the most widely accepted and has been in use for over 40 years. The simplicity of up to 5/8″ 16mm leveling with a single bolt per location while providing shock and vibration isolation solves many problems. Friction is developed by the neoprene element, eliminating the need for bolting to the floor.…

RL & RCL

Light Load Leveling Mounts Mountings can be used with or without plated steel glide cups or leveling bolts. Furnished with 3/8 – 16 or 1/2 – 13 tapped holes or studs to accommodate large or small holes in the machinery leg. • Neoprene resists oil, oxygen and ozone. • Upper plate provides uniform mounting loading. • May be bolted directly without leveling…