PCHS

PCHS BULLETINS & DOCUMENTATIONHAVE A SPECIFIC QUESTION?Please enable JavaScript in your browser to complete this form.Name *Email *City *State *Country *Message *Send Message RELATED PRODUCTS

HS

HS – Spring Hanger We reduced these problems by writing specifications and manufacturing hangers with the hole in the bottom of the hanger box as large as the I.D. of the spring. The HS Spring Hangers evolved using our standard A, B and C Springs and seating them in LDS cups with projecting bushings to…

PC30N – 4” DEF. 1000 SERIES

PC30N – 4” DEF. 1000 SERIES Hangers shall be as described in 30N spec, but they shall be pre-compressed and locked at the rated deflection by means of a resilient seismic up stop to keep the piping or equipment at a fixed elevation during installation. The hangers shall be designed with a release mechanism to…

PC30N – 3” DEF. 1000 SERIES

PC30N – 3” DEF. 1000 SERIES Hangers shall be as described in 30N spec, but they shall be pre-compressed and locked at the rated deflection by means of a resilient seismic up stop to keep the piping or equipment at a fixed elevation during installation. The hangers shall be designed with a release mechanism to…

PC30N – 5” DEF. 100 SERIES

PC30N – 5” DEF. 100 SERIES Hangers shall be as described in 30N spec, but they shall be pre-compressed and locked at the rated deflection by means of a resilient seismic up stop to keep the piping or equipment at a fixed elevation during installation. The hangers shall be designed with a release mechanism to…

PC30N – 4” DEF. 100 SERIES

PC30N – 4” DEF. 100 SERIES Hangers shall be as described in 30N spec, but they shall be pre-compressed and locked at the rated deflection by means of a resilient seismic up stop to keep the piping or equipment at a fixed elevation during installation. The hangers shall be designed with a release mechanism to…

PC30N – 3” DEF 100 SERIES

PC30N – 3” DEF. 100 SERIES Hangers shall be as described in 30N spec, but they shall be pre-compressed and locked at the rated deflection by means of a resilient seismic up stop to keep the piping or equipment at a fixed elevation during installation. The hangers shall be designed with a release mechanism to…

PC30N – 2” DEF 100 SERIES

PC30N – 2” DEF. 100 SERIES Hangers shall be as described in 30N spec, but they shall be pre-compressed and locked at the rated deflection by means of a resilient seismic up stop to keep the piping or equipment at a fixed elevation during installation. The hangers shall be designed with a release mechanism to…

PC30N – 1” DEF

PC30N – 1” DEFLECTION Hangers shall be as described in 30N spec, but they shall be pre-compressed and locked at the rated deflection by means of a resilient seismic up stop to keep the piping or equipment at a fixed elevation during installation. The hangers shall be designed with a release mechanism to free the…

30N – 4” DEF 1000 SERIES

30N – 4” DEF. 1000 SERIES Hangers shall consist of rigid steel frame containing a minimum 1-1/4” (32mm) thick LDS rubber element at the top and a steel spring with general characteristics as in specification B seated in a steel washer reinforced LDS rubber cup on the bottom. The LDS rubber element and the cup…