Braided Hose with Carbon Steel Fixed & Floating Flanges FFL Braided Stainless Steel Hose has fixed and floating raised face flanges. Years ago, almost all stainless steel hose was manufactured with a floating flange on one end. It is still important because it makes lining up the holes easier during installation, and eliminates the possibility…
CSAMN These assemblies have been “CSA” approved for use on gas pipelines. “CSA” is the current certification agency for gas industry products, assuming the authority formerly associated with the American Gas Association (AGA). Pipe Size (mm) MN End to End (mm) WN End to End (mm) Live Length (mm) Corru- gations per foot Maxi- mum…
MN– SS Braided Hose with Stainless Steel Threaded Nipples Our steam service ratings are very low in the interest of safety although our 70°F 21°C pressure ratings are as high or higher then our competitors. All locations where failure could lead to personal injury or suffocation must be avoided. In dangerous locations we suggest housed…
MN with Dielectric Unions Stainless Steel Flexible Connectors contribute to the solution of vibration, noise, expansion and offset motion problems in piping systems. Assemblies are designed for both high and low temperatures, as well as high pressure and full vacuum. Stock sizes include 1/2” (13mm) through 16” (400mm) pipe diameter. Temperature ranges are from below…
MN & MN-UL – SS Braided Hose with Carbon Steel Threaded Nipples Stainless Steel Flexible Connectors contribute to the solution of vibration, noise, expansion and offset motion problems in piping systems. Assemblies are designed for both high and low temperatures, as well as high pressure and full vacuum. Stock sizes include 1/2” (13mm) through 16”…
BRONZE BRAIDED 60Vee HOSE with COPPER FEMALE SWEAT ENDS for MEDICAL GAS When using VCPSB products in stainless steel water systems, dielectric unions must be used on each end to prevent leakage from galvanic action. Tubing Size & End to End (mm) Live Length (mm) Corru- gations per meter A (mm) B (mm) C (mm)…
BRONZE BRAIDED 60Vee HOSE with COPPER FEMALE SWEAT ENDS When using VCPSB products in stainless steel water systems, dielectric unions must be used on each end to prevent leakage from galvanic action. VCPSB Tubing Size & End to End (in) Live Length (in) Corru- gations per foot A (in) B (in) C (in) 1/2 x…
60Vee SS Braided Hose with Stainless Steel Threaded Nipples Many buildings are separated by expansion joints through the walls and floors. During an earthquake, the two adjacent parts resonate with relative motion of as much as ± 4” (100mm) in shear as well as toward and away from one another. Vertical motion is minimal. We…
60Vee SS Braided Hose with Stainless Steel Floating Flanges Many buildings are separated by expansion joints through the walls and floors. During an earthquake, the two adjacent parts resonate with relative motion of as much as ± 4” (100mm) in shear as well as toward and away from one another. Vertical motion is minimal. We…
60Vee SS BRAIDED HOSE with CARBON STEEL THREADED NIPPLES for SPRINKLER and FIRE PROTECTION SYSTEMS Our steam service ratings are very low in the interest of safety although our 70°F (21°C) pressure ratings are as high or higher then our competitors. All locations where failure could lead to personal injury or suffocation must be avoided.…