Braided SS Vee with Carbon Steel Male Nipples Many buildings are separated by expansion joints through the walls and floors. During an earthquake, the two adjacent parts resonate with relative motion of as much as ± 4” (100mm) in shear as well as toward and away from one another. Vertical motion is minimal. We have…
60Vee SS BRAIDED HOSE with CARBON STEEL WELD NIPPLES for SPRINKLER and FIRE PROTECTION SYSTEMS Our steam service ratings are very low in the interest of safety although our 70°F (21°C) pressure ratings are as high or higher then our competitors. All locations where failure could lead to personal injury or suffocation must be avoided.…
Braided SS Vee with Carbon Steel Floating Flanges Many buildings are separated by expansion joints through the walls and floors. During an earthquake, the two adjacent parts resonate with relative motion of as much as ± 4” (100mm) in shear as well as toward and away from one another. Vertical motion is minimal. We have…
Braided SS Vee with Carbon Steel Weld Nipples Many buildings are separated by expansion joints through the walls and floors. During an earthquake, the two adjacent parts resonate with relative motion of as much as ± 4” (100mm) in shear as well as toward and away from one another. Vertical motion is minimal. We have…
60Vee SS BRAIDED HOSE with CARBON STEEL THREADED NIPPLES Our steam service ratings are very low in the interest of safety although our 70°F (21°C) pressure ratings are as high or higher then our competitors. All locations where failure could lead to personal injury or suffocation must be avoided. In dangerous locations we suggest housed…
60Vee SS BRAIDED HOSE with CARBON STEEL GROOVED WELD NIPPLES Our steam service ratings are very low in the interest of safety although our 70°F (21°C) pressure ratings are as high or higher then our competitors. All locations where failure could lead to personal injury or suffocation must be avoided. In dangerous locations we suggest…
60Vee SS BRAIDED HOSE with CARBON STEEL FLOATING FLANGES Our steam service ratings are very low in the interest of safety although our 70°F (21°C) pressure ratings are as high or higher then our competitors. All locations where failure could lead to personal injury or suffocation must be avoided. In dangerous locations we suggest housed…
¾” TO 2″ There is a strong demand for stainless expansion joints in 2” thru 16” diameter with 2” axial and 1/4” transverse capability. Weld ends are most common, but there are also flanged requirements. All our flanged joints have one floating flange to facilitate installation and eliminate torsional stress. The other is raised face.…
2″ TO 16″ There is a strong demand for stainless expansion joints in 2” thru 16” diameter with 2” axial and 1/4” transverse capability. Weld ends are most common, but there are also flanged requirements. All our flanged joints have one floating flange to facilitate installation and eliminate torsional stress. The other is raised face.…
RESTRAINED FLANGED BELLOWS All Restrained Flanged Bellows are designed for 1” 25mm Compression, 3/8” 9mm Elongation and 1/8” 3mm Transverse movement. If piping is not anchored, the pressure will open the joints 3/8” 9mm. When proper anchors are installed, movements will take place as required. Pipe Size & Face to Face (in) Corrugations per foot…